SAMBA-TOOL(8)

NAME
samba-tool - Main Samba administration tool.

SYNOPSIS
    .HP u
        samba-tool
         [-h]
         [-W myworkgroup]
         [-U user]
         [-d debuglevel]
         [--v]

DESCRIPTION

    .PP This tool is part of the samba(7) suite.

OPTIONS

    .PP -h|--help

        Show this help message and exit
        .RE

    -r|--realm=REALM

                Set the realm for the domain.

                Note that specifying this parameter here will override the realm parameter in the /etc/samba/smb.conf file.

    --simple-bind-dn=DN

                DN to use for a simple bind.

    --password

                Specify the password on the commandline.

                Be cautious about including passwords in scripts or passing user-supplied values onto the command line. For security it is better to let the Samba client tool ask for the password if needed, or obtain the password once with kinit.

                If --password is not specified, the tool will check the PASSWD environment variable, followed by PASSWD_FD which is expected to contain an open file descriptor (FD) number.

                Finally it will check PASSWD_FILE (containing a file path to be opened). The file should only contain the password. Make certain that the permissions on the file restrict access from unwanted users!

                While Samba will attempt to scrub the password from the process title (as seen in ps), this is after startup and so is subject to a race.

    -U|--user=[DOMAIN\]USERNAME[%PASSWORD]

                Sets the SMB username or username and password.

                If %PASSWORD is not specified, the user will be prompted. The client will first check the USER environment variable (which is also permitted to also contain the password separated by a %), then the LOGNAME variable (which is not permitted to contain a password) and if either exists, the value is used. If these environmental variables are not found, the username found in a Kerberos Credentials cache may be used.

                A third option is to use a credentials file which contains the plaintext of the username and password. This option is mainly provided for scripts where the admin does not wish to pass the credentials on the command line or via environment variables. If this method is used, make certain that the permissions on the file restrict access from unwanted users. See the -A for more details.

                Be cautious about including passwords in scripts or passing user-supplied values onto the command line. For security it is better to let the Samba client tool ask for the password if needed, or obtain the password once with kinit.

                While Samba will attempt to scrub the password from the process title (as seen in ps), this is after startup and so is subject to a race.

    -W|--workgroup=WORKGROUP

                Set the SMB domain of the username. This overrides the default domain which is the domain defined in smb.conf. If the domain specified is the same as the servers NetBIOS name, it causes the client to log on using the servers local SAM (as opposed to the Domain SAM).

                Note that specifying this parameter here will override the workgroup parameter in the /etc/samba/smb.conf file.

    -N|--no-pass

                If specified, this parameter suppresses the normal password prompt from the client to the user. This is useful when accessing a service that does not require a password.

                Unless a password is specified on the command line or this parameter is specified, the client will request a password.

                If a password is specified on the command line and this option is also defined the password on the command line will be silently ignored and no password will be used.

    --use-kerberos=desired|required|off

                This parameter determines whether Samba client tools will try to authenticate using Kerberos. For Kerberos authentication you need to use dns names instead of IP addresses when connecting to a service.

                Note that specifying this parameter here will override the client use kerberos parameter in the /etc/samba/smb.conf file.

    --use-krb5-ccache=CCACHE

                Specifies the credential cache location for Kerberos authentication.

                This will set --use-kerberos=required too.

    -A|--authentication-file=filename

                This option allows you to specify a file from which to read the username and password used in the connection. The format of the file is:

            				username = <value>
            				password = <value>
            				domain   = <value>

                Make certain that the permissions on the file restrict access from unwanted users!

        .PP --ipaddress=IPADDRESS

            IP address of the server
            .RE
            .PP --color=always|never|auto

                      Indicate whether samba-tool should use ANSI colour codes in its output. If 'auto' (the default), samba-tool will use colour when its output is directed toward a terminal, unless the NO_COLOR environment variable is set and non-empty.

                      The values 'yes' and 'force' are accepted as synonyms for 'always'; 'no' and 'none' for 'never'; and 'tty' and 'if-tty' for 'auto'.

                      Note that asking for colour doesn't mean samba-tool will necessarily be very colourful. Many commands are very monochrome, particularly when successful.

                .RE

            -d|--debuglevel=DEBUGLEVEL

                        level is an integer from 0 to 10. The default value if this parameter is not specified is 1 for client applications.

                        The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.

                        Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

                        Note that specifying this parameter here will override the log level parameter in the /etc/samba/smb.conf file.

            --debug-stdout

                        This will redirect debug output to STDOUT. By default all clients are logging to STDERR.

COMMANDS

  computer

    .PP Manage computer accounts.

computer add computername [options]

        .PP Add a new computer to the Active Directory Domain.
        .PP The new computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

        .PP --computerou=COMPUTEROU

            DN of alternative location (with or without domainDN counterpart) to default CN=Computers in which new computer object will be created. E.g. 'OU=OUname'.
            .RE
            .PP --description=DESCRIPTION

                The new computer's description.
                .RE
                .PP --ip-address=IP_ADDRESS_LIST

                    IPv4 address for the computer's A record, or IPv6 address for AAAA record, can be provided multiple times.
                    .RE
                    .PP --service-principal-name=SERVICE_PRINCIPAL_NAME_LIST

                        Computer's Service Principal Name, can be provided multiple times.
                        .RE
                        .PP --prepare-oldjoin

                            Prepare enabled machine account for oldjoin mechanism.
                            .RE

                    computer create computername [options]

                            .PP Add a new computer. This is a synonym for the samba-tool computer add command and is available for compatibility reasons only. Please use samba-tool computer add instead.

                    computer delete computername [options]

                            .PP Delete an existing computer account.
                            .PP The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

                    computer edit computername

                            .PP Edit a computer AD object.
                            .PP The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

                            .PP --editor=EDITOR

                                Specifies the editor to use instead of the system default, or 'vi' if no system default is set.
                                .RE

                        computer list

                                .PP List all computers.

                        computer move computername new_parent_dn [options]

                                .PP This command moves a computer account into the specified organizational unit or container.
                                .PP The computername specified on the command is the sAMAccountName, with or without the trailing dollar sign.
                                .PP The name of the organizational unit or container can be specified as a full DN or without the domainDN component.

                        computer show computername [options]

                                .PP Display a computer AD object.
                                .PP The computer name specified on the command is the sAMAccountName, with or without the trailing dollar sign.

                                .PP --attributes=USER_ATTRS

                                    Comma separated list of attributes, which will be printed.
                                    .RE

  contact

    .PP Manage contacts.

contact add [contactname] [options]

        .PP Add a new contact to the Active Directory Domain.
        .PP The name of the new contact can be specified by the first argument 'contactname' or the --given-name, --initial and --surname arguments. If no 'contactname' is given, contact's name will be made up of the given arguments by combining the given-name, initials and surname. Each argument is optional. A dot ('.') will be appended to the initials automatically.

        .PP --ou=OU

            DN of alternative location (with or without domainDN counterpart) in which the new contact will be created. E.g. 'OU=OUname'. Default is the domain base.
            .RE
            .PP --description=DESCRIPTION

                The new contact's description.
                .RE
                .PP --surname=SURNAME

                    Contact's surname.
                    .RE
                    .PP --given-name=GIVEN_NAME

                        Contact's given name.
                        .RE
                        .PP --initials=INITIALS

                            Contact's initials.
                            .RE
                            .PP --display-name=DISPLAY_NAME

                                Contact's display name.
                                .RE
                                .PP --job-title=JOB_TITLE

                                    Contact's job title.
                                    .RE
                                    .PP --department=DEPARTMENT

                                        Contact's department.
                                        .RE
                                        .PP --company=COMPANY

                                            Contact's company.
                                            .RE
                                            .PP --mail-address=MAIL_ADDRESS

                                                Contact's email address.
                                                .RE
                                                .PP --internet-address=INTERNET_ADDRESS

                                                    Contact's home page.
                                                    .RE
                                                    .PP --telephone-number=TELEPHONE_NUMBER

                                                        Contact's phone number.
                                                        .RE
                                                        .PP --mobile-number=MOBILE_NUMBER

                                                            Contact's mobile phone number.
                                                            .RE
                                                            .PP --physical-delivery-office=PHYSICAL_DELIVERY_OFFICE

                                                                Contact's office location.
                                                                .RE

                                                        contact create [contactname] [options]

                                                                .PP Add a new contact. This is a synonym for the samba-tool contact add command and is available for compatibility reasons only. Please use samba-tool contact add instead.

                                                        contact delete contactname [options]

                                                                .PP Delete an existing contact.
                                                                .PP The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

                                                        contact edit contactname

                                                                .PP Modify a contact AD object.
                                                                .PP The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

                                                                .PP --editor=EDITOR

                                                                    Specifies the editor to use instead of the system default, or 'vi' if no system default is set.
                                                                    .RE

                                                            contact list [options]

                                                                    .PP List all contacts.

                                                                    .PP --full-dn

                                                                        Display contact's full DN instead of the name.
                                                                        .RE

                                                                contact move contactname new_parent_dn [options]

                                                                        .PP This command moves a contact into the specified organizational unit or container.
                                                                        .PP The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

                                                                contact show contactname [options]

                                                                        .PP Display a contact AD object.
                                                                        .PP The contactname specified on the command is the common name or the distinguished name of the contact object. The distinguished name of the contact can be specified with or without the domainDN component.

                                                                        .PP --attributes=CONTACT_ATTRS

                                                                            Comma separated list of attributes, which will be printed.
                                                                            .RE

                                                                    contact rename contactname [options]

                                                                            .PP Rename a contact and related attributes.
                                                                            .PP This command allows to set the contact's name related attributes. The contact's CN will be renamed automatically. The contact's new CN will be made up by combining the given-name, initials and surname. A dot ('.') will be appended to the initials automatically, if required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to reset this change.
                                                                            .PP Use an empty attribute value to remove the specified attribute.
                                                                            .PP The contact name specified on the command is the CN.

                                                                            .PP --surname=SURNAME

                                                                                New surname.
                                                                                .RE
                                                                                .PP --given-name=GIVEN_NAME

                                                                                    New given name.
                                                                                    .RE
                                                                                    .PP --initials=INITIALS

                                                                                        New initials.
                                                                                        .RE
                                                                                        .PP --force-new-cn=NEW_CN

                                                                                            Specify a new CN (RDN) instead of using a combination of the given name, initials and surname.
                                                                                            .RE
                                                                                            .PP --reset-cn

                                                                                                Set the CN to the default combination of given name, initials and surname.
                                                                                                .RE
                                                                                                .PP --display-name=DISPLAY_NAME

                                                                                                    New display name.
                                                                                                    .RE
                                                                                                    .PP --mail-address=MAIL_ADDRESS

                                                                                                        New email address.
                                                                                                        .RE

  dbcheck

    .PP Check the local AD database for errors.

  delegation

    .PP Manage Delegations.

delegation add-service accountname principal [options]

        .PP Add a service principal as msDS-AllowedToDelegateTo.

delegation del-service accountname principal [options]

        .PP Delete a service principal as msDS-AllowedToDelegateTo.

delegation for-any-protocol accountname [(on|off)] [options]

        .PP Set/unset UF_TRUSTED_TO_AUTHENTICATE_FOR_DELEGATION (S4U2Proxy) for an account.

delegation for-any-service accountname [(on|off)] [options]

        .PP Set/unset UF_TRUSTED_FOR_DELEGATION for an account.

delegation show accountname [options]

        .PP Show the delegation setting of an account.

  dns

    .PP Manage Domain Name Service (DNS).

dns add server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data

        .PP Add a DNS record.

dns delete server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT data

        .PP Delete a DNS record.

dns query server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT|ALL [options] data

        .PP Query a name.

dns roothints server [name] [options]

        .PP Query root hints.

dns serverinfo server [options]

        .PP Query server information.

dns update server zone name A|AAAA|PTR|CNAME|NS|MX|SRV|TXT olddata newdata

        .PP Update a DNS record.

dns zonecreate server zone [options]

        .PP Create a zone.

dns zonedelete server zone [options]

        .PP Delete a zone.

dns zoneinfo server zone [options]

        .PP Query zone information.

dns zonelist server [options]

        .PP List zones.

  domain

    .PP Manage Domain.

domain backup

        .PP Create or restore a backup of the domain.

domain backup offline

        .PP Backup (with proper locking) local domain directories into a tar file.

domain backup online

        .PP Copy a running DC's current DB into a backup tar file.

domain backup rename

        .PP Copy a running DC's DB to backup file, renaming the domain in the process.

domain backup restore

        .PP Restore the domain's DB from a backup-file.

  domain auth policy

    .PP Manage authentication policies.

domain auth policy list

        .PP List authentication policies on the domain.

            .PP -H, --URL

                    LDB URL for database or target server.
                .RE
                .PP --json

                        View authentication policies as JSON instead of a list.
                    .RE

        domain auth policy view

                .PP View an authentication policy on the domain.

                    .PP -H, --URL

                            LDB URL for database or target server.
                        .RE
                        .PP --name

                                Name of the authentication policy to view (required).
                            .RE

                domain auth policy create

                        .PP Create authentication policies on the domain.

                            .PP -H, --URL

                                    LDB URL for database or target server.
                                .RE
                                .PP --name

                                        Name of the authentication policy (required).
                                    .RE
                                    .PP --description

                                            Optional description for the authentication policy.
                                        .RE
                                        .PP --protect

                                                    Protect authentication policy from accidental deletion.

                                                    Cannot be used together with --unprotect.

                                            .RE
                                            .PP --unprotect

                                                        Unprotect authentication policy from accidental deletion.

                                                        Cannot be used together with --protect.

                                                .RE
                                                .PP --audit

                                                            Only audit authentication policy.

                                                            Cannot be used together with --enforce.

                                                    .RE
                                                    .PP --enforce

                                                                Enforce authentication policy.

                                                                Cannot be used together with --audit.

                                                        .RE
                                                        .PP --strong-ntlm-policy

                                                                    Strong NTLM Policy (Disabled, Optional, Required).

                                                            .RE
                                                            .PP --user-tgt-lifetime-mins

                                                                        Ticket-Granting-Ticket lifetime for user accounts.

                                                                .RE
                                                                .PP --user-allow-ntlm-auth

                                                                            Allow NTLM and Interactive NETLOGON SamLogon authentication despite the fact that allowed-to-authenticate-from is in use, which would otherwise restrict the user to selected devices.

                                                                    .RE
                                                                    .PP --user-allowed-to-authenticate-from

                                                                                Conditions a device must meet for users covered by this policy to be allowed to authenticate. While this is a restriction on the device, any conditional ACE rules are expressed as if the device was a user.

                                                                                Must be a valid SDDL string without reference to Device keywords.

                                                                                Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AU)}))

                                                                        .RE
                                                                        .PP --user-allowed-to-authenticate-to=SDDL

                                                                                    This policy, applying to a user account that is offering a service, eg a web server with a user account, restricts which accounts may access it.

                                                                                    Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

                                                                                    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

                                                                            .RE
                                                                            .PP --service-tgt-lifetime-mins

                                                                                        Ticket-Granting-Ticket lifetime for service accounts.

                                                                                .RE
                                                                                .PP --service-allow-ntlm-auth

                                                                                            Allow NTLM network authentication when service is restricted to selected devices.

                                                                                    .RE
                                                                                    .PP --service-allowed-to-authenticate-from

                                                                                                Conditions a device must meet for service accounts covered by this policy to be allowed to authenticate. While this is a restriction on the device, any conditional ACE rules are expressed as if the device was a user.

                                                                                                Must be a valid SDDL string without reference to Device keywords.

                                                                                                SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AU)}))

                                                                                        .RE
                                                                                        .PP --service-allowed-to-authenticate-to=SDDL

                                                                                                    This policy, applying to a service account (eg a Managed Service Account, Group Managed Service Account), restricts which accounts may access it.

                                                                                                    Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

                                                                                                    SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

                                                                                            .RE
                                                                                            .PP --computer-tgt-lifetime-mins

                                                                                                        Ticket-Granting-Ticket lifetime for computer accounts.

                                                                                                .RE
                                                                                                .PP --computer-allowed-to-authenticate-to=SDDL

                                                                                                            This policy, applying to a computer account (eg a server or workstation), restricts which accounts may access it.

                                                                                                            Must be a valid SDDL string. The SDDL can reference both bare (user) and Device conditions.

                                                                                                            SDDL Example: O:SYG:SYD:(XA;OICI;CR;;;WD;(Member_of {SID(AO)}))

                                                                                                    .RE

                                                                                        domain auth policy modify

                                                                                                .PP Modify authentication policies on the domain. The same options apply as for domain auth policy create.

                                                                                        domain auth policy delete

                                                                                                .PP Delete authentication policies on the domain.

                                                                                                    .PP -H, --URL

                                                                                                            LDB URL for database or target server.
                                                                                                        .RE
                                                                                                        .PP --name

                                                                                                                Name of authentication policy to delete (required).
                                                                                                            .RE
                                                                                                            .PP --force

                                                                                                                    Force authentication policy delete even if it is protected.
                                                                                                                .RE

                                                                                                    domain auth policy user-allowed-to-authenticate-from set

                                                                                                            .PP Set the user-allowed-to-authenticate-from property by scenario.

                                                                                                                .PP -H, --URL

                                                                                                                        LDB URL for database or target server.
                                                                                                                    .RE
                                                                                                                    .PP --name

                                                                                                                            Name of authentication policy.
                                                                                                                        .RE
                                                                                                                        .PP --by-group=GROUP

                                                                                                                                User is allowed to authenticate, if the device they authenticate from is assigned and granted membership of a given GROUP.
                                                                                                                            .RE
                                                                                                                            .PP --silo=SILO

                                                                                                                                    User is allowed to authenticate, if the device they authenticate from is assigned and granted membership of a given SILO.
                                                                                                                                .RE

                                                                                                                    domain auth policy user-allowed-to-authenticate-to set

                                                                                                                            .PP Set the user-allowed-to-authenticate-to property by scenario.

                                                                                                                                .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication policy.
                                                                                                                                    .RE
                                                                                                                                    .PP --group=GROUP

                                                                                                                                        The user account, offering a network service, covered by this policy, will only be allowed access from other accounts that are members of the given GROUP.
                                                                                                                                    .RE
                                                                                                                                    .PP --silo=SILO

                                                                                                                                        The user account, offering a network service, covered by this policy, will only be allowed access from other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.
                                                                                                                                    .RE

                                                                                                                        domain auth policy service-allowed-to-authenticate-from set

                                                                                                                                .PP Set the service-allowed-to-authenticate-from property by scenario.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication policy.
                                                                                                                                    .RE
                                                                                                                                    .PP --group=GROUP

                                                                                                                                        The service account (eg a Managed Service Account, Group Managed Service Account) is allowed to authenticate, if the device it authenticates from is a member of the given GROUP.
                                                                                                                                    .RE
                                                                                                                                    .PP --silo=SILO

                                                                                                                                        The service account (eg a Managed Service Account, Group Managed Service Account) is allowed to authenticate, if the device it authenticates from is assigned and granted membership of a given SILO.
                                                                                                                                    .RE

                                                                                                                        domain auth policy service-allowed-to-authenticate-to set

                                                                                                                                .PP Set the service-allowed-to-authenticate-to property by scenario.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication policy.
                                                                                                                                    .RE
                                                                                                                                    .PP --group=GROUP

                                                                                                                                        The service account (eg a Managed Service Account, Group Managed Service Account), will only be allowed access by other accounts that are members of the given GROUP.
                                                                                                                                    .RE
                                                                                                                                    .PP --silo=SILO

                                                                                                                                        The service account (eg a Managed Service Account, Group Managed Service Account), will only be allowed access by other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.
                                                                                                                                    .RE

                                                                                                                        domain auth policy computer-allowed-to-authenticate-to set

                                                                                                                                .PP Set the computer-allowed-to-authenticate-to property by scenario.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication policy.
                                                                                                                                    .RE
                                                                                                                                    .PP --group=GROUP

                                                                                                                                        The computer account (eg a server or workstation), will only be allowed access by other accounts that are members of the given GROUP.
                                                                                                                                    .RE
                                                                                                                                    .PP --silo=SILO

                                                                                                                                        The computer account (eg a server or workstation), will only be allowed access by other accounts that are assigned to, granted membership of (and meet any authentication conditions of) the given SILO.
                                                                                                                                    .RE

  domain auth silo

    .PP Manage authentication silos.

domain auth silo list

        .PP List authentication silos on the domain.

            .PP -H, --URL

                    LDB URL for database or target server.
                .RE
                .PP --json

                        View authentication silos as JSON instead of a list.
                    .RE

        domain auth silo view

                .PP View an authentication silo on the domain.

                    .PP -H, --URL

                            LDB URL for database or target server.
                        .RE
                        .PP --name

                                Name of the authentication silo to view (required).
                            .RE

                domain auth silo create

                        .PP Create authentication silos on the domain.

                            .PP -H, --URL

                                    LDB URL for database or target server.
                                .RE
                                .PP --name

                                        Name of the authentication silo (required).
                                    .RE
                                    .PP --description

                                            Optional description for the authentication silo.
                                        .RE
                                        .PP --user-authentication-policy

                                                User account authentication policy.
                                            .RE
                                            .PP --service-authentication-policy

                                                    Managed service account authentication policy.
                                                .RE
                                                .PP --computer-authentication-policy

                                                        Computer authentication policy.
                                                    .RE
                                                    .PP --protect

                                                                Protect authentication silo from accidental deletion.

                                                                Cannot be used together with --unprotect.

                                                        .RE
                                                        .PP --unprotect

                                                                    Unprotect authentication silo from accidental deletion.

                                                                    Cannot be used together with --protect.

                                                            .RE
                                                            .PP --audit

                                                                        Only audit silo policies.

                                                                        Cannot be used together with --enforce.

                                                                .RE
                                                                .PP --enforce

                                                                            Enforce silo policies.

                                                                            Cannot be used together with --audit.

                                                                    .RE

                                                        domain auth silo modify

                                                                .PP Modify authentication silos on the domain.

                                                                    .PP -H, --URL

                                                                            LDB URL for database or target server.
                                                                        .RE
                                                                        .PP --name

                                                                                Name of the authentication silo (required).
                                                                            .RE
                                                                            .PP --description

                                                                                    Optional description for the authentication silo.
                                                                                .RE
                                                                                .PP --user-authentication-policy

                                                                                        User account authentication policy.
                                                                                    .RE
                                                                                    .PP --service-authentication-policy

                                                                                            Managed service account authentication policy.
                                                                                        .RE
                                                                                        .PP --computer-authentication-policy

                                                                                                Computer authentication policy.
                                                                                            .RE
                                                                                            .PP --protect

                                                                                                        Protect authentication silo from accidental deletion.

                                                                                                        Cannot be used together with --unprotect.

                                                                                                .RE
                                                                                                .PP --unprotect

                                                                                                            Unprotect authentication silo from accidental deletion.

                                                                                                            Cannot be used together with --protect.

                                                                                                    .RE
                                                                                                    .PP --audit

                                                                                                                Only audit silo policies.

                                                                                                                Cannot be used together with --enforce.

                                                                                                        .RE
                                                                                                        .PP --enforce

                                                                                                                    Enforce silo policies.

                                                                                                                    Cannot be used together with --audit.

                                                                                                            .RE

                                                                                                domain auth silo delete

                                                                                                        .PP Delete authentication silos on the domain.

                                                                                                            .PP -H, --URL

                                                                                                                    LDB URL for database or target server.
                                                                                                                .RE
                                                                                                                .PP --name

                                                                                                                        Name of authentication silo to delete (required).
                                                                                                                    .RE
                                                                                                                    .PP --force

                                                                                                                            Force authentication silo delete even if it is protected.
                                                                                                                        .RE

                                                                                                            domain auth silo member grant

                                                                                                                    .PP Grant a member access to an authentication silo.

                                                                                                                        .PP -H, --URL

                                                                                                                                LDB URL for database or target server.
                                                                                                                            .RE
                                                                                                                            .PP --name

                                                                                                                                    Name of authentication silo (required).
                                                                                                                                .RE
                                                                                                                                .PP --member

                                                                                                                                        Member to grant access to the silo (DN or account name).
                                                                                                                                    .RE

                                                                                                                        domain auth silo member list

                                                                                                                                .PP List members in an authentication silo.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication silo (required).
                                                                                                                                    .RE
                                                                                                                                    .PP --json

                                                                                                                                        View members as JSON instead of a list.
                                                                                                                                    .RE

                                                                                                                        domain auth silo member revoke

                                                                                                                                .PP Revoke a member from an authentication silo.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Name of authentication silo (required).
                                                                                                                                    .RE
                                                                                                                                    .PP --member

                                                                                                                                        Member to revoke from the silo (DN or account name).
                                                                                                                                    .RE

                                                                                                                        domain claim claim-type list

                                                                                                                                .PP List claim types on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --json

                                                                                                                                        View claim types as JSON instead of a list.
                                                                                                                                    .RE

                                                                                                                        domain claim claim-type view

                                                                                                                                .PP View a single claim type on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Display name of claim type to view (required).
                                                                                                                                    .RE

                                                                                                                        domain claim claim-type create

                                                                                                                                .PP Create claim types on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --attribute

                                                                                                                                        Attribute of claim type to create (required).
                                                                                                                                    .RE
                                                                                                                                    .PP --class

                                                                                                                                            Object classes to set claim type to.

                                                                                                                                            Example: --class=user --class=computer

                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Optional display name or use attribute name.
                                                                                                                                    .RE
                                                                                                                                    .PP --description

                                                                                                                                        Optional description or use from attribute.
                                                                                                                                    .RE
                                                                                                                                    .PP --enable

                                                                                                                                            Enable claim type.

                                                                                                                                            Cannot be used together with --disable.

                                                                                                                                    .RE
                                                                                                                                    .PP --disable

                                                                                                                                            Disable claim type.

                                                                                                                                            Cannot be used together with --enable.

                                                                                                                                    .RE
                                                                                                                                    .PP --protect

                                                                                                                                            Protect claim type from accidental deletion.

                                                                                                                                            Cannot be used together with --unprotect.

                                                                                                                                    .RE
                                                                                                                                    .PP --unprotect

                                                                                                                                            Unprotect claim type from accidental deletion.

                                                                                                                                            Cannot be used together with --protect.

                                                                                                                                    .RE

                                                                                                                        domain claim claim-type modify

                                                                                                                                .PP Modify claim types on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Display name of claim type to modify (required).
                                                                                                                                    .RE
                                                                                                                                    .PP --class

                                                                                                                                            Object classes to set claim type to.

                                                                                                                                            Example: --class=user --class=computer

                                                                                                                                    .RE
                                                                                                                                    .PP --description

                                                                                                                                        Set the claim type description.
                                                                                                                                    .RE
                                                                                                                                    .PP --enable

                                                                                                                                            Enable claim type.

                                                                                                                                            Cannot be used together with --disable.

                                                                                                                                    .RE
                                                                                                                                    .PP --disable

                                                                                                                                            Disable claim type.

                                                                                                                                            Cannot be used together with --enable.

                                                                                                                                    .RE
                                                                                                                                    .PP --protect

                                                                                                                                            Protect claim type from accidental deletion.

                                                                                                                                            Cannot be used together with --unprotect.

                                                                                                                                    .RE
                                                                                                                                    .PP --unprotect

                                                                                                                                            Unprotect claim type from accidental deletion.

                                                                                                                                            Cannot be used together with --protect.

                                                                                                                                    .RE

                                                                                                                        domain claim claim-type delete

                                                                                                                                .PP Delete claim types on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Display name of claim type to delete (required).
                                                                                                                                    .RE
                                                                                                                                    .PP --force

                                                                                                                                        Force claim type delete even if it is protected.
                                                                                                                                    .RE

                                                                                                                        domain claim value-type list

                                                                                                                                .PP List claim value types on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --json

                                                                                                                                        View claim value types as JSON instead of a list.
                                                                                                                                    .RE

                                                                                                                        domain claim value-type view

                                                                                                                                .PP View a single claim value type on the domain.

                                                                                                                                    .PP -H, --URL

                                                                                                                                        LDB URL for database or target server.
                                                                                                                                    .RE
                                                                                                                                    .PP --name

                                                                                                                                        Display name of claim value type to view (required).
                                                                                                                                    .RE

  service-account

    .PP Service account management.

service-account list

        .PP List service accounts on the domain.

            .PP -H, --URL

                    LDB URL for database or target server.
                .RE
                .PP --json

                        View service accounts as JSON instead of a list.
                    .RE

        service-account view

                .PP View a single service account on the domain.

                    .PP -H, --URL

                            LDB URL for database or target server.
                        .RE
                        .PP --name

                                Account name of service account to view (required).
                            .RE

                service-account create

                        .PP Create a new service account on the domain.

                            .PP -H, --URL

                                    LDB URL for database or target server.
                                .RE
                                .PP --name

                                        Account name of service account (required).
                                    .RE
                                    .PP --dns-host-name

                                            DNS hostname of this service account (required).
                                        .RE
                                        .PP --group-msa-membership

                                                Optional Group MSA Membership SDDL.
                                            .RE
                                            .PP --managed-password-interval

                                                    Managed password refresh interval in days.
                                                .RE

                                    service-account modify

                                            .PP Modify an existing service account on the domain.

                                                .PP -H, --URL

                                                        LDB URL for database or target server.
                                                    .RE
                                                    .PP --name

                                                            Account name of service account (required).
                                                        .RE
                                                        .PP --dns-host-name

                                                                Update DNS hostname of this service account.
                                                            .RE
                                                            .PP --group-msa-membership

                                                                    Update Group MSA Membership SDDL.
                                                                .RE

                                                    service-account delete

                                                            .PP Delete a service accounts on the domain.

                                                                .PP -H, --URL

                                                                        LDB URL for database or target server.
                                                                    .RE
                                                                    .PP --name

                                                                            Account name of service account to delete.
                                                                        .RE

  service-account group-msa-membership

    .PP Service account Group MSA Membership management.

service-account group-msa-membership show

        .PP Display Group MSA Membership for a service account.

            .PP -H, --URL

                    LDB URL for database or target server.
                .RE
                .PP --name

                        Account name of service account (required).
                    .RE
                    .PP --json

                            Return as JSON instead of a list.
                        .RE

            service-account group-msa-membership add

                    .PP Add a principal to Group MSA Membership for a service account.

                        .PP -H, --URL

                                LDB URL for database or target server.
                            .RE
                            .PP --name

                                    Account name of service account (required).
                                .RE
                                .PP --principal

                                        Name, DN or SID of principal to add.
                                    .RE

                        service-account group-msa-membership remove

                                .PP Remove a principal from Group MSA Membership for a service account.

                                    .PP -H, --URL

                                            LDB URL for database or target server.
                                        .RE
                                        .PP --name

                                                Account name of service account (required).
                                            .RE
                                            .PP --principal

                                                    Name, DN or SID of principal to remove.
                                                .RE

                                    domain classicupgrade [options] classic_smb_conf

                                            .PP Upgrade from Samba classic (NT4-like) database to Samba AD DC database.

                                    domain dcpromo dnsdomain [DC|RODC] [options]

                                            .PP Promote an existing domain member or NT4 PDC to an AD DC.

                                    domain demote

                                            .PP Demote ourselves from the role of domain controller.

                                    domain exportkeytab keytab [options]

                                            .PP Dumps Kerberos keys of the domain into a keytab.

                                    domain info ip_address [options]

                                            .PP Print basic info about a domain and the specified DC.

                                    domain join dnsdomain [DC|RODC|MEMBER|SUBDOMAIN] [options]

                                            .PP Join a domain as either member or backup domain controller.

                                    domain level show|raise options [options]

                                            .PP Show/raise domain and forest function levels.

                                    domain passwordsettings show|set options [options]

                                            .PP Show/set password settings.

                                    domain passwordsettings pso

                                            .PP Manage fine-grained Password Settings Objects (PSOs).

                                    domain passwordsettings pso apply pso-name user-or-group-name [options]

                                            .PP Applies a PSO's password policy to a user or group.

                                    domain passwordsettings pso create pso-name precedence [options]

                                            .PP Creates a new Password Settings Object (PSO).

                                    domain passwordsettings pso delete pso-name [options]

                                            .PP Deletes a Password Settings Object (PSO).

                                    domain passwordsettings pso list [options]

                                            .PP Lists all Password Settings Objects (PSOs).

                                    domain passwordsettings pso set pso-name [options]

                                            .PP Modifies a Password Settings Object (PSO).

                                    domain passwordsettings pso show user-name [options]

                                            .PP Displays a Password Settings Object (PSO).

                                    domain passwordsettings pso show-user pso-name [options]

                                            .PP Displays the Password Settings that apply to a user.

                                    domain passwordsettings pso unapply pso-name user-or-group-name [options]

                                            .PP Updates a PSO to no longer apply to a user or group.

                                    domain provision

                                            .PP Promote an existing domain member or NT4 PDC to an AD DC.

                                    domain trust

                                            .PP Domain and forest trust management.

                                    domain trust create DOMAIN options [options]

                                            .PP Create a domain or forest trust.

                                    domain trust modify DOMAIN options [options]

                                            .PP Modify a domain or forest trust.

                                    domain trust delete DOMAIN options [options]

                                            .PP Delete a domain trust.

                                    domain trust list options [options]

                                            .PP List domain trusts.

                                    domain trust namespaces [DOMAIN] options [options]

                                            .PP Manage forest trust namespaces.

                                    domain trust show DOMAIN options [options]

                                            .PP Show trusted domain details.

                                    domain trust validate DOMAIN options [options]

                                            .PP Validate a domain trust.

  drs

    .PP Manage Directory Replication Services (DRS).

drs bind

        .PP Show DRS capabilities of a server.

drs kcc

        .PP Trigger knowledge consistency center run.

drs options

        .PP Query or change options for NTDS Settings object of a domain controller.

drs replicate destination_DC source_DC NC [options]

        .PP Replicate a naming context between two DCs.

drs showrepl

        .PP Show replication status. The [--json] option results in JSON output, and with the [--summary] option produces very little output when the replication status seems healthy.

  dsacl

    .PP Administer DS ACLs

dsacl delete

        .PP Delete an access list entry on a directory object.

dsacl get

        .PP Print access list on a directory object.

dsacl set

        .PP Modify access list on a directory object.

  forest

    .PP Manage Forest configuration.

forest directory_service

        .PP Manage directory_service behaviour for the forest.

forest directory_service dsheuristics VALUE

        .PP Modify dsheuristics directory_service configuration for the forest.

forest directory_service show

        .PP Show current directory_service configuration for the forest.

  fsmo

    .PP Manage Flexible Single Master Operations (FSMO).

fsmo seize [options]

        .PP Seize the role.

fsmo show

        .PP Show the roles.

fsmo transfer [options]

        .PP Transfer the role.

  gpo

    .PP Manage Group Policy Objects (GPO).

gpo create displayname [options]

        .PP Create an empty GPO.

gpo del gpo [options]

        .PP Delete GPO.

gpo dellink container_dn gpo [options]

        .PP Delete GPO link from a container.

gpo fetch gpo [options]

        .PP Download a GPO.

gpo getinheritance container_dn [options]

        .PP Get inheritance flag for a container.

gpo getlink container_dn [options]

        .PP List GPO Links for a container.

gpo list username [options]

        .PP List GPOs for an account.

gpo listall

        .PP List all GPOs.

gpo listcontainers gpo [options]

        .PP List all linked containers for a GPO.

gpo setinheritance container_dn block|inherit [options]

        .PP Set inheritance flag on a container.

gpo setlink container_dn gpo [options]

        .PP Add or Update a GPO link to a container.

gpo show gpo [options]

        .PP Show information for a GPO.

gpo manage symlink list

        .PP List VGP Symbolic Link Group Policy from the sysvol

gpo manage symlink add

        .PP Adds a VGP Symbolic Link Group Policy to the sysvol

gpo manage symlink remove

        .PP Removes a VGP Symbolic Link Group Policy from the sysvol

gpo manage files list

        .PP List VGP Files Group Policy from the sysvol

gpo manage files add

        .PP Add VGP Files Group Policy to the sysvol

gpo manage files remove

        .PP Remove VGP Files Group Policy from the sysvol

gpo manage openssh list

        .PP List VGP OpenSSH Group Policy from the sysvol

gpo manage openssh set

        .PP Sets a VGP OpenSSH Group Policy to the sysvol

gpo manage sudoers add

        .PP Adds a Samba Sudoers Group Policy to the sysvol.

gpo manage sudoers list

        .PP List Samba Sudoers Group Policy from the sysvol.

gpo manage sudoers remove

        .PP Removes a Samba Sudoers Group Policy from the sysvol.

gpo manage scripts startup list

        .PP List VGP Startup Script Group Policy from the sysvol

gpo manage scripts startup add

        .PP Adds VGP Startup Script Group Policy to the sysvol

gpo manage scripts startup remove

        .PP Removes VGP Startup Script Group Policy from the sysvol

gpo manage motd list

        .PP List VGP MOTD Group Policy from the sysvol.

gpo manage motd set

        .PP Sets a VGP MOTD Group Policy to the sysvol

gpo manage issue list

        .PP List VGP Issue Group Policy from the sysvol.

gpo manage issue set

        .PP Sets a VGP Issue Group Policy to the sysvol

gpo manage access add

        .PP Adds a VGP Host Access Group Policy to the sysvol

gpo manage access list

        .PP List VGP Host Access Group Policy from the sysvol

gpo manage access remove

        .PP Remove a VGP Host Access Group Policy from the sysvol

  group

    .PP Manage groups.

group add groupname [options]

        .PP Create a new AD group.

group create groupname [options]

        .PP Add a new AD group. This is a synonym for the samba-tool group add command and is available for compatibility reasons only. Please use samba-tool group add instead.

group addmembers groupname members [options]

        .PP Add members to an AD group.

group delete groupname [options]

        .PP Delete an AD group.

group edit groupname

        .PP Edit a group AD object.

        .PP --editor=EDITOR

            Specifies the editor to use instead of the system default, or 'vi' if no system default is set.
            .RE

    group list

            .PP List all groups.

    group listmembers groupname [options]

            .PP List all members of the specified AD group.
            .PP By default the sAMAccountNames are listed. If no sAMAccountName is available, the CN will be used instead.

            .PP --full-dn

                List the distinguished names instead of the sAMAccountNames.
                .RE
                .PP --hide-expired

                    Do not list expired group members.
                    .RE
                    .PP --hide-disabled

                        Do not list disabled group members.
                        .RE

                group move groupname new_parent_dn [options]

                        .PP This command moves a group into the specified organizational unit or container.
                        .PP The groupname specified on the command is the sAMAccountName.
                        .PP The name of the organizational unit or container can be specified as a full DN or without the domainDN component.
                        .PP

                group removemembers groupname members [options]

                        .PP Remove members from the specified AD group.

                group show groupname [options]

                        .PP Show group object and it's attributes.

                group stats [options]

                        .PP Show statistics for overall groups and group memberships.

                group rename groupname [options]

                        .PP Rename a group and related attributes.
                        .PP This command allows to set the group's name related attributes. The group's CN will be renamed automatically. The group's CN will be the sAMAccountName. Use the --force-new-cn option to specify the new CN manually and the --reset-cn to reset this change.
                        .PP Use an empty attribute value to remove the specified attribute.
                        .PP The groupname specified on the command is the sAMAccountName.

                        .PP --force-new-cn=NEW_CN

                            Specify a new CN (RDN) instead of using the sAMAccountName.
                            .RE
                            .PP --reset-cn

                                Set the CN to the sAMAccountName.
                                .RE
                                .PP --mail-address=MAIL_ADDRESS

                                    New mail address
                                    .RE
                                    .PP --samaccountname=SAMACCOUNTNAME

                                        New account name (sAMAccountName/logon name)
                                        .RE

  ldapcmp URL1 URL2 domain|configuration|schema|dnsdomain|dnsforest [options]

    .PP Compare two LDAP databases.

  ntacl

    .PP Manage NT ACLs.

ntacl changedomsid original-domain-SID new-domain-SID file [options]

        .PP Change the domain SID for ACLs. Can be used to change all entries in acl_xattr when the machine's SID has accidentally changed or the data set has been copied to another machine either via backup/restore or rsync.

        .PP --use-ntvfs

            Set the ACLs directly to the TDB or xattr. The POSIX permissions will NOT be changed, only the NT ACL will be stored.
            .RE
            .PP --service=SERVICE

                Specify the name of the smb.conf service to use. This option is required in combination with the --use-s3fs option.
                .RE
                .PP --use-s3fs

                    Set the ACLs for use with the default s3fs file server via the VFS layer. This option requires a smb.conf service, specified by the --service=SERVICE option.
                    .RE
                    .PP --xattr-backend=[native|tdb]

                        Specify the xattr backend type (native fs or tdb).
                        .RE
                        .PP --eadb-file=EADB_FILE

                            Name of the tdb file where attributes are stored.
                            .RE
                            .PP --recursive

                                Set the ACLs for directories and their contents recursively.
                                .RE
                                .PP --follow-symlinks

                                    Follow symlinks when --recursive is specified.
                                    .RE
                                    .PP --verbose

                                        Verbosely list files and ACLs which are being processed.
                                        .RE

                                ntacl get file [options]

                                        .PP Get ACLs on a file.

                                ntacl set acl file [options]

                                        .PP Set ACLs on a file.

                                ntacl sysvolcheck

                                        .PP Check sysvol ACLs match defaults (including correct ACLs on GPOs).

                                ntacl sysvolreset

                                        .PP Reset sysvol ACLs to defaults (including correct ACLs on GPOs).

  ou

    .PP Manage organizational units (OUs).

ou add ou_dn [options]

        .PP Add a new organizational unit.
        .PP The name of the organizational unit can be specified as a full DN or without the domainDN component.

        .PP --description=DESCRIPTION

            Specify OU's description.
            .RE

    ou create ou_dn [options]

            .PP Add a new organizational unit. This is a synonym for the samba-tool ou add command and is available for compatibility reasons only. Please use samba-tool ou add instead.

    ou delete ou_dn [options]

            .PP Delete an organizational unit.
            .PP The name of the organizational unit can be specified as a full DN or without the domainDN component.

            .PP --force-subtree-delete

                Delete organizational unit and all children recursively.
                .RE

        ou list [options]

                .PP List all organizational units.

                .PP --full-dn

                    Display DNs including the base DN.
                    .RE

            ou listobjects ou_dn [options]

                    .PP List all objects in an organizational unit.
                    .PP The name of the organizational unit can be specified as a full DN or without the domainDN component.

                    .PP --full-dn

                        Display DNs including the base DN.
                        .RE
                        .PP -r|--recursive

                            List objects recursively.
                            .RE

                    ou move old_ou_dn new_parent_dn [options]

                            .PP Move an organizational unit.
                            .PP The name of the organizational units can be specified as a full DN or without the domainDN component.

                    ou rename old_ou_dn new_ou_dn [options]

                            .PP Rename an organizational unit.
                            .PP The name of the organizational units can be specified as a full DN or without the domainDN component.

  rodc

    .PP Manage Read-Only Domain Controller (RODC).

rodc preload SID|DN|accountname [options]

        .PP Preload one account for an RODC.

  schema

    .PP Manage and query schema.

schema attribute modify attribute [options]

        .PP Modify the behaviour of an attribute in schema.

schema attribute show attribute [options]

        .PP Display an attribute schema definition.

schema attribute show_oc attribute [options]

        .PP Show objectclasses that MAY or MUST contain this attribute.

schema objectclass show objectclass [options]

        .PP Display an objectclass schema definition.

  shell

    .PP Opens an interactive Samba Python shell.

shell [options]

        .PP Opens an interactive Python shell for Samba ldb connection.

            .PP -H, --URL

                    LDB URL for database or target server.
                .RE

  sites

    .PP Manage sites.

sites list [options]

        .PP List sites.

            .PP --json

                    Output as JSON instead of a list
                .RE

    sites view site [options]

            .PP View site details.

    sites create site [options]

            .PP Create a new site.

    sites remove site [options]

            .PP Delete an existing site.

    sites subnet list site [options]

            .PP List subnets for a site.

                .PP --json

                        Output as JSON instead of a list
                    .RE

        sites subnet view subnet [options]

                .PP View subnet details.

        sites subnet create subnet site-of-subnet [options]

                .PP Create a new subnet.

        sites subnet remove subnet [options]

                .PP Delete an existing subnet.

        sites subnet set-site subnet site-of-subnet [options]

                .PP Assign a subnet to a site.

  spn

    .PP Manage Service Principal Names (SPN).

spn add name user [options]

        .PP Create a new SPN.

spn delete name [user] [options]

        .PP Delete an existing SPN.

spn list user [options]

        .PP List SPNs of a given user.

  testparm

    .PP Check the syntax of the configuration file.

  time

    .PP Retrieve the time on a server.

  user

    .PP Manage users.

user add username [password]

        .PP Add a new user to the Active Directory Domain.

user create username [password]

        .PP Add a new user. This is a synonym for the samba-tool user add command and is available for compatibility reasons only. Please use samba-tool user add instead.

user delete username [options]

        .PP Delete an existing user account.

user disable username

        .PP Disable a user account.

user edit username

        .PP Edit a user account AD object.

        .PP --editor=EDITOR

            Specifies the editor to use instead of the system default, or 'vi' if no system default is set.
            .RE

    user enable username

            .PP Enable a user account.

    user list

            .PP List all users.
            .PP By default the user's sAMAccountNames are listed.

            .PP --full-dn

                List user's distinguished names instead of the sAMAccountNames.
                .RE
                .PP -b BASE_DN|--base-dn=BASE_DN

                    Specify base DN to use. Only users under the specified base DN will be listed.
                    .RE
                    .PP --hide-expired

                        Do not list expired user accounts.
                        .RE
                        .PP --hide-disabled

                            Do not list disabled user accounts.
                            .RE
                            .PP --locked-only

                                Only list locked user accounts.
                                .RE

                        user setprimarygroup username primarygroupname

                                .PP Set the primary group a user account.

                        user getgroups username

                                .PP Get the direct group memberships of a user account.

                        user show username [options]

                                .PP Display a user AD object.

                                .PP --attributes=USER_ATTRS

                                    Comma separated list of attributes, which will be printed.
                                    .RE

                            user move username new_parent_dn [options]

                                    .PP This command moves a user account into the specified organizational unit or container.
                                    .PP The username specified on the command is the sAMAccountName.
                                    .PP The name of the organizational unit or container can be specified as a full DN or without the domainDN component.

                            user password [options]

                                    .PP Change password for a user account (the one provided in authentication).

                            user rename username [options]

                                    .PP Rename a user and related attributes.
                                    .PP This command allows to set the user's name related attributes. The user's CN will be renamed automatically. The user's new CN will be made up by combining the given-name, initials and surname. A dot ('.') will be appended to the initials automatically, if required. Use the --force-new-cn option to specify the new CN manually and --reset-cn to reset this change.
                                    .PP Use an empty attribute value to remove the specified attribute.
                                    .PP The username specified on the command is the sAMAccountName.

                                    .PP --surname=SURNAME

                                        New surname
                                        .RE
                                        .PP --given-name=GIVEN_NAME

                                            New given name
                                            .RE
                                            .PP --initials=INITIALS

                                                New initials
                                                .RE
                                                .PP --force-new-cn=NEW_CN

                                                    Specify a new CN (RDN) instead of using a combination of the given name, initials and surname.
                                                    .RE
                                                    .PP --reset-cn

                                                        Set the CN to the default combination of given name, initials and surname.
                                                        .RE
                                                        .PP --display-name=DISPLAY_NAME

                                                            New display name
                                                            .RE
                                                            .PP --mail-address=MAIL_ADDRESS

                                                                New email address
                                                                .RE
                                                                .PP --samaccountname=SAMACCOUNTNAME

                                                                    New account name (sAMAccountName/logon name)
                                                                    .RE
                                                                    .PP --upn=UPN

                                                                        New user principal name
                                                                        .RE

                                                                user setexpiry username [options]

                                                                        .PP Set the expiration of a user account.

                                                                user setpassword username [options]

                                                                        .PP Sets or resets the password of a user account.

                                                                user unlock username [options]

                                                                        .PP This command unlocks a user account in the Active Directory domain.

                                                                user getpassword username [options]

                                                                        .PP Gets the password of a user account.

                                                                user get-kerberos-ticket username [options]

                                                                        .PP Gets a Kerberos Ticket Granting Ticket as the account.

                                                                user syncpasswords --cache-ldb-initialize [options]

                                                                        .PP Syncs the passwords of all user accounts, using an optional script.
                                                                        .PP Note that this command should run on a single domain controller only (typically the PDC-emulator).

                                                                user auth policy assign username [options]

                                                                        .PP Set assigned authentication policy for user.

                                                                            .PP --policy

                                                                                    Name of authentication policy to assign or leave empty to remove.
                                                                                .RE

                                                                    user auth policy remove username

                                                                            .PP Remove assigned authentication policy from user.

                                                                    user auth policy view username

                                                                            .PP View the assigned authentication policy for user.

                                                                    user auth silo assign username [options]

                                                                            .PP Set assigned authentication silo for user.

                                                                                .PP --silo

                                                                                        Name of authentication silo to assign or leave empty to remove.
                                                                                    .RE

                                                                        user auth silo remove username

                                                                                .PP Remove assigned authentication silo from user.

                                                                        user auth silo view username

                                                                                .PP View the assigned authentication silo for user.

  vampire [options] domain

    .PP Join and synchronise a remote AD domain to the local server. Please note that samba-tool vampire is deprecated, please use samba-tool domain join instead.

  visualize [options] subcommand

    .PP Produce graphical representations of Samba network state. To work out what is happening in a replication graph, it is sometimes helpful to use visualisations.
    .PP There are two subcommands, two graphical modes, and (roughly) two modes of operation with respect to the location of authority.
    .sp
MODES OF OPERATION
        .PP samba-tool visualize ntdsconn

                        Looks at NTDS connections.
                        .RE
            .PP samba-tool visualize reps

                    Looks at repsTo and repsFrom objects.
                    .RE
                .PP samba-tool visualize uptodateness

                        Looks at replication lag as shown by the uptodateness vectors.
                        .RE
                    .RE
                    .sp
                GRAPHICAL MODES
                        .PP --distance

                                        Distances between DCs are shown in a matrix in the terminal.
                                        .RE
                            .PP --dot

                                            Generate Graphviz dot output (for ntdsconn and reps modes). When viewed using dot or xdot, this shows the network as a graph with DCs as vertices and connections edges. Certain types of degenerate edges are shown in different colours or line-styles.
                                            .RE
                                .PP --xdot

                                                Generate Graphviz dot output as with [--dot] and attempt to view it immediately using /usr/bin/xdot.
                                                .RE
                                    .RE
                                    .PP -r

                                            Normally, samba-tool talks to one database; with the [-r] option attempts are made to contact all the DCs known to the first database. This is necessary for samba-tool visualize uptodateness and for samba-tool visualize reps because the repsFrom/To objects are not replicated, and it can reveal replication issues in other modes.
                                                    .RE

  help

Gives usage information.

VERSION

    .PP This man page is complete for version 4.21.0 of the Samba suite.

AUTHOR

    .PP The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.